Picked up a rough, and I mean 16 beers deep on a Tuesday at 3am rough nissan d21 king cab But I saw potential so I took her home.
After realizing the wiring was more like one solid melted cable of doom, decided to gut everything. Interior, engine bay, even chopped the front off to start fresh with the whole front clip from A donor truck and about 100 hours of fab and body work, I was satisfied.
Clinched rear flares, modified front ebay flares, custom front bumper designed after the E30 M3 kit, custom side skirts, shaved everything like it was an Olympic swimmer.
bagged and lays frame, reverse 4 link in the rear. Rhode fab bag mounts and shock brackets, tailgate and door shave kit, plate holder, rear spoiler, interior grab handles, center console and a custom made Jax Four-play manual valve body. Triangulated lower control arms.
The 17x9 deep dish steel wheels powdercoated Egyptian sunrise gold flake, truck paint purple flake from Roth flake. Which is all from a rattle can BTW, Complete Interior refresh, fuel cell, ka24e swap, 5 speed from a 240sx.
Clear tail from Europe and some led retro fit headlights. All LED interior and exterior lights. Under glow because why not.
Nrg quick release and blah blah blah.
Built this in a little 1 car garage on the ground with basic tools.
Painted in that same garage. Hope yall enjoy.
Bag mounts and shock mounts Upper and lower bag mountsRhode fab
Updates
1 post
Some updates
8/28/2026
SBlazington started this build
8/12/2026
Cragar Soft black 8 · 17 x 9 -48Kumho Ecsta PS31 · 245/40 R17Air Lift Performance Universal bagsRhode fab Rear spoilerRhode fab Door and tailgate shave kitNrg Bucket seatsNRG Quick release and wheelBag mounts and shock mounts Upper and lower bag mountsRhode fab Triangulation kit
Similar Build Threads
Check out these similar build threads from our community