K-Tuned K1 Street Coilovers 00-09 Honda S2000 (AP1/AP2) - 14K front and 8K rear springs

Item SKU: KTD-K1R-S2K

K-Tuned K1 Street Coilovers for the 2000-2009 Honda S2000 AP1 and AP2. This K1 Coilovers setup uses 14K front and 8K rear springs, adjustable ride height, and 12-way damping adjustment for an S2000 that sees regular street miles but still needs a more controlled setup.

• Fitment: Built for 2000-2003 S2000 AP1 and 2004-2009 S2000 AP2 models.
• Spring rates: 14K front and 8K rear. This is the spring package supplied with this SKU.
• Damping adjustment: 12-way adjustable damping lets you set the response around the spring rates and the roads you actually drive.
• Ride height and preload: Adjustable aluminum spring perches allow ride-height, preload, and travel adjustment. Useful when you want to set the car where it sits right without simply cranking the spring down.
• Strut construction: Heat-treated steel pistons, needle valves, proprietary strut oil, and high-heat double seals are part of the K1 Street damper assembly.
• Springs: High-tensile-strength steel springs designed for full travel without coil bind.

On an S2000, suspension changes are something you feel every time the road gets rough or the car loads up through a corner. The useful part of this setup is having both ride-height and damping adjustment in the same package. Set the height, keep appropriate travel and preload, then use the 12 damping positions to dial in how the car handles broken pavement and everyday driving. No more treating the spring rate as the only tool you have.

K-Tuned builds the K1 Street line around daily-driven use, with the damper doing the work rather than relying on an overly stiff spring to mask a basic strut. For an AP1 or AP2 owner replacing tired factory suspension or setting up a street-focused S2000, this stuff gives you adjustment where it matters without straying from the K1 Street format.