K-Tuned Front Camber Kit (UCA) 92-95 Honda Civic EG / 94-01 Acura Integra DC2 - Hardened Rubber Bushing

Item SKU: KTD-FUR-924

K-Tuned Camber Kit front upper control arms for the 1992-1995 Honda Civic EG and 1994-2001 Acura Integra DC2. This pair uses K-Tuned's hardened-rubber bushings and gives you front camber adjustment on a lowered Civic or Integra.

• Fitment: 1992-1995 Honda Civic EG and 1994-2001 Acura Integra DC2.
• Location: Front upper control arm camber kit, sold as a pair.
• Bushings: Hardened rubber with a stiffer durometer than OEM. Good for replacing tired factory arm bushings while retaining a rubber-bushed setup.
• Use: Built for lowered cars, with adjustment for getting the front alignment where it needs to be for street driving or track setup.
• Installation note: Torque the camber plate bolts to 11 Nm.

On an EG or DC2, worn upper-arm bushings can leave the front end feeling vague and make alignment harder to hold. This stuff replaces the original upper arms with an adjustable setup, so you can dial in camber after lowering the car instead of living with whatever the suspension settles at. The hardened-rubber version keeps the bushing arrangement closer to a street-car approach than a spherical setup.

Stick to K-Tuned's intended ride-height range. These arms are for lowered cars and have been tested to a maximum of 3 inches below stock. Don't use them on cars raised above stock, and don't go lower than that tested drop, since the ball joint can contact the edge of its cup and be damaged.