Get the Homie Hookup
6Deals
×

Get The Homie Hookup

No deals available at this time.

Photo 1 of 15
1 / 15

JZX83 Drift Project

The story

92 MX83 Cressida, Purchased in June 2022 with the 1j and r154 already put in, however this was with the stock twins and barely running. New plugs and coils resolved this issue, however after testing for less then 5minutes one of the stock twins decided to let go. The plan originally was to just but in new twins and recap the ecu (was stuck in limp mode), and then just drive the car a little and iron out any other issues that arose. I had even purchased new turbos to go in and all, but after seeing a manifold come up for a reasonable price it sent me spiraling into the rabbit hole this car currently is. the plan was always to turn it into a drift oriented car, its just happening a whole lot earlier then planned. It is extremely far from finished, but I like to document things so here we are. When I remember I'll update with new changes. chairs x

Current mods

13 parts installed
WheelsOEM
3 Row Aluminium rad, twin thermos manually switched.Notes
Full 1JZGTE Non vvti + R154 swapNotes
Full custom 3 inch turbo back system, one straight through resonator on the rear.Notes
GJ Drivelines 1000HP rated single piece tailshaftNotes
JRP 14 in 1 digital multi gaugeNotes
R33 GTST 4 pot calipers + BA Falcon rotors front brake upgrade, along with HEL Braided lines.Notes
Raceworks Fuel
Single turbo conversion, Custom manifold, Ebay 3076, Mostly custom lines, external gate running 7psi gate pressure on the stock JZZ30 ECU (Recapped at start of project)Notes
Takashi Front Mount IntercoolerEngine Components
OS Giken Twin Plate ClutchDrivetrain

Updates

  1. Saucy started this build

    5/16/2023
    OEMBC Racing BR SeriesCubespeed Short ShifterRaceworksTakashi Front Mount IntercoolerOS Giken Twin Plate Clutch

Similar Build Threads

Check out these similar build threads from our community

Sign up for the raddest build threads out there & get free discounts on thousands of car parts!
Note: You can opt-out at any time. See our Privacy Policy.
Copyright © 2026 MartiniWorksPrivacy PolicyTerms & Conditions